Cart
Checkout Secure

Coupon Code: FT68LD435 Copy Code

This is the official NUDEcnc shop  

Ncore V1 - CPU waterblock for LGA1151 socket now with Nlap DIE

£99.00
 
Checkout Secure
Checkout Secure

4 Great reasons to buy from us:

  • Image of Secure Ordering
  • Image of 100% Satisfaction Guaranteed
  • Image of Easy Returns
  • Image of

THIS IS PREORDER!!

Ncore is a CPU waterblock designed for naked die cooling

It has a unique "in socket” mounting system.

By integrating the IHS with the Ncore’s, water is enabled to flow 20x closer to the CPU, when compared to other systems available on the market. It provides same protection of the CPU die as the IHS after installing standard option waterblock.

Installation takes less than 12 seconds

Delidder (mounting frame) is not included with this block (check out the Ncore V1D)

Ncore V1 is supporting the LGA1151 socket and it is designed for delidded CPUs only.

Features of Ncore V1 - water cooling block:

  • Ncore has the IHS integrated into its design. It protects it the same way that the IHS after installing standard option waterblock.
  • Designed for a delidded CPU! It is all about delidding- it is worth it!
  • Water is 20x closer to the CPU
  • As ΔT is lower, you can run much hotter coolant. Increasing the coolants temperature in the same environment improves greatly the radiators performance. This allows it to run the same system with lower fan RPM.
  • To prevent leaking, improve durability, strength, overall structural integrity and appearance of the Ncore, it has a brass top, and a metal ¼ inlet- outlet connectors
  • the best rubber o-rings to prevent leakage - rubber compound by Viton- FKM Rubber, developed by DuPont Performance Elastomers, taken from an Aerospace, F1 an Oil industry- a Viton® or FKM rubber.
  • Ncore V1 uses the LGA socket as its installation bracket. There is no need for any extra frames or screws.
  • Ncore V1 can run with smaller (cheaper) pump and up to 3x (vs non delidded) smaller radiator. This is a great solution for small (ITX) builds and significantly cheaper

Mounting is very easy, see the video below: 

How to mount the Ncore

Shipping
 This Item Ships to 
Nlap will fit LGA 1151 CPUs NCore will fit following sockets:
  • Intel LGA-1150/1151/1155/1156
  • Intel LGA-2011(-3)

Mother Board 1151 will fit following CPU’s: 6600, 6700, 7600, 7700, 8600, 8700, 8700K, 9600, 9700, 9900K,

Will not fit:
  • X299/ LG2066
  • Threadripper Chips

   

Please allow 10 days for your order to arrive. It all depends on couriers, not us. We use DHL and Hermes Couriers for the UK and International Shipping We dispatch orders within 1 working day from receiving the payment. All orders are dispatched with tracking. You will get a tracking link directly from the courier system once we book the shipment.

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

Here are 5 more great reasons to buy from us:

so
   

You get a full 30 days to return your item to us. Products returned for credit due to customer remorse or incorrect purchase decision must be received within 30 days of invoice date in an unaltered and undamaged state. Only packaging can be opened, the product must not have any traces of use. Customer will be charged up to 15% restocking fee if processing costs occur during reprocessing at NUDEcnc. NUDEcnc will not demand a restocking fee for returned products that are defective. A qualified NUDEcnc technician will test each returned product for defects and issue appropriate action as agreed with a customer via the RMA process. Warranty is void if a product has been tampered with in a way in which it was not designed for or described in the user manual. Misuse, modification, handling damage (i.e. dropping) will void the warranty. Returned items must be in »like new« condition. Returns will not be accepted without an authorized RMA number, which is valid for 14 days after being issued. When the RMA request is opened, it is mandatory for a customer, to send good quality photos or video, where the damage or faulty function is clearly visible/audiable.

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

Ordering from NudeCNC is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.

THIS IS PREORDER!!

Ncore is a CPU waterblock designed for naked die cooling

It has a unique "in socket” mounting system.

By integrating the IHS with the Ncore’s, water is enabled to flow 20x closer to the CPU, when compared to other systems available on the market. It provides same protection of the CPU die as the IHS after installing standard option waterblock.

Installation takes less than 12 seconds

Delidder (mounting frame) is not included with this block (check out the Ncore V1D)

Ncore V1 is supporting the LGA1151 socket and it is designed for delidded CPUs only.

Features of Ncore V1 - water cooling block:

  • Ncore has the IHS integrated into its design. It protects it the same way that the IHS after installing standard option waterblock.
  • Designed for a delidded CPU! It is all about delidding- it is worth it!
  • Water is 20x closer to the CPU
  • As ΔT is lower, you can run much hotter coolant. Increasing the coolants temperature in the same environment improves greatly the radiators performance. This allows it to run the same system with lower fan RPM.
  • To prevent leaking, improve durability, strength, overall structural integrity and appearance of the Ncore, it has a brass top, and a metal ¼ inlet- outlet connectors
  • the best rubber o-rings to prevent leakage - rubber compound by Viton- FKM Rubber, developed by DuPont Performance Elastomers, taken from an Aerospace, F1 an Oil industry- a Viton® or FKM rubber.
  • Ncore V1 uses the LGA socket as its installation bracket. There is no need for any extra frames or screws.
  • Ncore V1 can run with smaller (cheaper) pump and up to 3x (vs non delidded) smaller radiator. This is a great solution for small (ITX) builds and significantly cheaper

Mounting is very easy, see the video below: 

How to mount the Ncore

Shipping
This Item Ships to   
Nlap will fit LGA 1151 CPUs NCore will fit following sockets:
  • Intel LGA-1150/1151/1155/1156
  • Intel LGA-2011(-3)

Mother Board 1151 will fit following CPU’s: 6600, 6700, 7600, 7700, 8600, 8700, 8700K, 9600, 9700, 9900K,

Will not fit:
  • X299/ LG2066
  • Threadripper Chips

   

Please allow 10 days for your order to arrive. It all depends on couriers, not us. We use DHL and Hermes Couriers for the UK and International Shipping We dispatch orders within 1 working day from receiving the payment. All orders are dispatched with tracking. You will get a tracking link directly from the courier system once we book the shipment.

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

Here are 5 more great reasons to buy from us:

so
   

You get a full 30 days to return your item to us. Products returned for credit due to customer remorse or incorrect purchase decision must be received within 30 days of invoice date in an unaltered and undamaged state. Only packaging can be opened, the product must not have any traces of use. Customer will be charged up to 15% restocking fee if processing costs occur during reprocessing at NUDEcnc. NUDEcnc will not demand a restocking fee for returned products that are defective. A qualified NUDEcnc technician will test each returned product for defects and issue appropriate action as agreed with a customer via the RMA process. Warranty is void if a product has been tampered with in a way in which it was not designed for or described in the user manual. Misuse, modification, handling damage (i.e. dropping) will void the warranty. Returned items must be in »like new« condition. Returns will not be accepted without an authorized RMA number, which is valid for 14 days after being issued. When the RMA request is opened, it is mandatory for a customer, to send good quality photos or video, where the damage or faulty function is clearly visible/audiable.

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

Ordering from NudeCNC is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.

Related Products

Ncore V1 - CPU waterblock for LGA1151 socket now with Nlap DIE

£99.00

What's the story about Ncore waterblock?

The Nlap - a lapping tool for your CPU LGA 1151

The Best Waterblock in the World - Don't Take Our Word For it! Here's What Our Customers Think:

Added to cart!
This is the official NUDEcnc shop to go to our main website click here! Free shipping when you order over XX You Have Qualified for Free Shipping This is the official NUDEcnc shop You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping